Woodworking Talk banner
Add bookmark
CENTERED DOWEL 2 -- CENTERED 1/2" stock

CENTERED DOWEL 2 -- CENTERED 1/2" stock

  • 0
  • 0
CENTERED DOWEL 4 -- take your dowel put it into the corner and tap with a hammer and turn and tap again as many times as you like CENTERED 3 1/2&quot

CENTERED DOWEL 4 -- take your dowel put it into the corner and tap with a hammer and turn and tap again as many times as you like CENTERED 3 1/2&quot

  • 0
  • 0
CENTERING DOWEL JIG3 --- trim metal off with the bandsaw -- drill hole to hang it up when not in use

CENTERING DOWEL JIG3 --- trim metal off with the bandsaw -- drill hole to hang it up when not in use

  • 0
  • 0
CENTERING DOWEL JIG2-- Cut half way thru it at a 45* angle for the blade--the blade is just a sharpened piece of aluminum or steel tap it into the slo

CENTERING DOWEL JIG2-- Cut half way thru it at a 45* angle for the blade--the blade is just a sharpened piece of aluminum or steel tap it into the slo

  • 0
  • 0
CENTERING DOWEL JIG1-- Begin with a square piece of stock 3/4" or thicker by however big you need it -- mine is 4"x4"x3/4"-- Add s

CENTERING DOWEL JIG1-- Begin with a square piece of stock 3/4" or thicker by however big you need it -- mine is 4"x4"x3/4"-- Add s

  • 0
  • 0
A

Dowel Centering Jig

My Dad had one of these years ago and I made one for myself... It takes the guess work out of drilling into the center of dowels or round material any size "one size fits all" type of thing....slide the dowel into the corner and tap with a hammer then turn a quarter turn and tap again as m
Click to expand...
There are no comments to display.

Album information

Album owner
AHERMAN
Date created
Item count
5
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

A

AHERMAN

Media items
5
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top