What are some thoughts on dimensions for a mobile base for a Delta 36-725? Or any guidelines/rule of thumbs. I am making one out of some tube steel and am stumped on how deep to make it. At first thought 27" to match the table depth as I will be adding storage that will support extension wings as life allows. But after doing some sketchup and some mock ups it doesn't feel right. But as I search the web it appears most are 27" from the pictures but haven't had much luck on true dimensions. Also tried finding dimensions of other mobile carts that have been built for similar saws without luck. I have plans from the Wood Store for their mobile sawing and routing base in which they specify 25 1/2" for the width. Obviously is adjustable to the saw but it appears the base matches the table depth without the rails. I am sure I am over thinking this but it is in my nature. I have included some screen shots from the plans from the Wood Store, a picture of my crude mock up of my saw on an scrap base (don't worry only used to get a feel for different heights. We were scrapping it at work and happened to be 27"), screen shots of some mobile bases that are similar to what I have in mind, and then screen shots of my sketchup. I may just need to hear that 27" is ok or that I am completely wrong. Any thoughts are appreciated and welcome. Thank you for your help in advance.