Begineer Lathe - Woodworking Talk - Woodworkers Forum
Reply
 
Thread Tools Display Modes
post #1 of 21 Old 03-03-2009, 11:16 PM Thread Starter
Junior Member
 
Join Date: Mar 2009
Posts: 6
View Trombly's Photo Album My Photos
Begineer Lathe

Hey Guys I looked on this forum a little and was looking around for a good begineer lathe. I noticed the JWL-1220 mentioned alot, is it worth it? Any other cheaper recomendations or should I just get a well known good brand right away? Also does variable speed really matter?(case its around another $150 more to get)

Thanks
Trombly is offline  
Sponsored Links
Advertisement
 
post #2 of 21 Old 03-04-2009, 12:53 AM
This Space For Rent
 
slatron25's Avatar
 
Join Date: Dec 2007
Location: TN
Posts: 819
View slatron25's Photo Album My Photos
Trombly, I've only been turning for about 4 months and I chose the Rikon mini. Both the Jet and the Rikon have been well recommended. I haven't had a bit of trouble out of my Rikon. What are you wanting to turn?

Tim
slatron25 is offline  
post #3 of 21 Old 03-04-2009, 09:13 AM
Senior Member
 
Join Date: Sep 2007
Location: Baxter, Tennessee
Posts: 3,257
View john lucas's Photo Album My Photos
I've been recommending both and all of the people who bought them like them. The Rikon only has 1/2hp and the Jet has 3/4. Other than that they are very similar and both companies seem to do a good job of correcting problems.
You can't really buy a full size lathe anywhere near that price that works as well as these things do. They are smooth, quiet, easy to use and everything works well and aligns like it is supposed to.
john lucas is offline  
Sponsored Links
Advertisement
 
post #4 of 21 Old 03-04-2009, 09:28 AM
Just makin chips fly
 
Join Date: Mar 2008
Location: FL an NC
Posts: 642
View The woodsman's Photo Album My Photos
beginer lathe

Hi an wecome,my 1st lathe was the Ricon,still have it,plus two others.I chose the Ricon because you can turn a 12" bowl over the 10" on the small jet I was looking at,plus it was cheaper in price,not quality.It does only have a 1/2 hp,but I have turned a lot of 11" bowls on it with little problem.I don't have the VS on any of my lathes.I also have a Nova 1624 and can change speeds on either one of them in less than 10 sec.Like said,it may depend on what you plan on turning.I would suggest you get the best you can afford.Just bdon't get one of those after market cheapo's,as they are just not worth it.
The woodsman is offline  
post #5 of 21 Old 03-04-2009, 12:32 PM
Senior Member
 
thekctermite's Avatar
 
Join Date: Dec 2007
Location: Mission, KS
Posts: 537
View thekctermite's Photo Album My Photos
I have the Jet 1220vs and just love it. Plenty of power, 12" swing, a little beefier and bigger than a lot of true mini lathes on the market.

I would ABSOLUTELY get the variable speed. People that don't have it say you don't need it, people that have it won't usually live without it. The main reason I like it is for sanding...You need slow rpms and you can get the variable speed model to lower rpms on the lowest belt setting than the non-vs model can get.

Buy as much lathe as you can afford. But also remember that the lathe is about half the cost of the things you'll need to get started right. A chuck, a better drive center and a few good lathe tools will set you back hundreds. Not to mention the money you'll quickly spend on a sharpening setup (a must-have), sandpaper, and finishes.
thekctermite is offline  
post #6 of 21 Old 03-04-2009, 01:34 PM
Senior Member
 
firehawkmph's Avatar
 
Join Date: Apr 2008
Location: Near Cleveland, Ohio
Posts: 4,982
View firehawkmph's Photo Album My Photos
I second the termite on the variable speed. I didn't have it on my 10" jet, and yes I could move the belt over in about 10-15 seconds. But on my 16" jet, I just turn the knob and set it exactly where I want it instantly without stopping. It doesn't sound like much but it will keep you from getting lazy and not changing the speed for a particular operation that requires it. Not a thing wrong with the Rikon or the Jet. Both have good reputations.
Mike Hawkins
firehawkmph is offline  
post #7 of 21 Old 03-04-2009, 03:06 PM
Member
 
Join Date: Jan 2009
Location: ocean county new jersey
Posts: 95
View jfs477's Photo Album My Photos
i just started turning and i bought the jet 1220. i looked at the rikon also but went for the jet because it was a little stronger and it had a bigger motor. best of luck john
jfs477 is offline  
post #8 of 21 Old 03-04-2009, 03:57 PM
Junior Member
 
Join Date: Jan 2009
Location: Sarasota, FL
Posts: 9
View batman562's Photo Album My Photos
Send a message via Yahoo to batman562
Hi, Trombly, I have been turning about 2 years. I started doing pens and apent about $5,000.00 on tools and supplies. Many pen kits, pen blanks, a lot of burls(they are $5 each!) I sold to friends and at craft shows. You will soon find that there is allways something that you need. Tools are expensive but worth the price, just get the best, not the mose expensive. But first get a good lathe! I have looked at Penn States Turncrafter Pro. The vs model is $239.00 A very good price. 10" over the bed is plenty of room. It comes highly recommended. That it the one I will buy then I get a new lathe.
batman562 is offline  
post #9 of 21 Old 03-04-2009, 04:20 PM
Senior Member
 
johnv51's Avatar
 
Join Date: Oct 2008
Location: Porter, TX
Posts: 375
View johnv51's Photo Album My Photos
I got a call from the frieght folks about an hour ago. My new Griz is being delivered tomorrow afternoon.

Spilling wine on oak does not make it purpleheart!
johnv51 is offline  
post #10 of 21 Old 03-04-2009, 07:31 PM
Senior Member
 
Join Date: Nov 2007
Location: central illinois
Posts: 912
View jdixon's Photo Album My Photos
John, I expect a review of that new Grizzly lathe before the weekends over. I would really like to know how you like it.

John
jdixon is offline  
post #11 of 21 Old 03-04-2009, 07:38 PM
Member
 
Join Date: Jan 2009
Location: ocean county new jersey
Posts: 95
View jfs477's Photo Album My Photos
grizzly lathe

thats a nice looking lathe and i agree withe john on the review.
happy turning!

john
jfs477 is offline  
post #12 of 21 Old 03-04-2009, 09:13 PM
Member
 
Join Date: Jul 2008
Posts: 42
View tripod58's Photo Album My Photos
I bought a Steel City about a month and a half ago and i'm using it to turn duck calls and other game calls. After turning a few barrels I noticed there was a difference in the thickness in the barrel. When I aligned the tailstock and headstock and they didn't match up and when you hand spun the headstock it revolved around the tailstock. Needless to say this wasn't acceptable for what I was doing, if you are just turning between centers it may be ok. After talking to Steel City they told me to take it back to Woodcraft, I got to Woodcraft and they had to call Steel City and a lady there told them if I was expecting that kind of accuracy that there lathe wasn't the one ZI needed, so I guess what i'm saying dont buy a Steel City. I upgraded to a Jet mini and love , no problems, wished I had the VS, next one I buy one it will be a VS Jet
tripod58 is offline  
post #13 of 21 Old 03-04-2009, 09:25 PM Thread Starter
Junior Member
 
Join Date: Mar 2009
Posts: 6
View Trombly's Photo Album My Photos
I was thinking Jet 1220 VS or Turncrafter Pro VS.
What tools would you guys recommend? Also anything else?
Thanks
Trombly is offline  
post #14 of 21 Old 03-04-2009, 09:32 PM
HLW
Senior Member
 
Join Date: Nov 2008
Location: Canton,N.C.
Posts: 174
View HLW's Photo Album My Photos
Jet 1220

Jet 1220 is rock solid! You'll like it.
HLW is offline  
post #15 of 21 Old 03-05-2009, 12:18 AM
Member
 
Join Date: Jan 2009
Location: ocean county new jersey
Posts: 95
View jfs477's Photo Album My Photos
tools depend on what your doing. i have been doing pens and turnigs in the same type of idea and i just use a spindle gouge. i did buy a bowl gouge too. i would say get a roughing gouge and a parting tool as well for a minimum
jfs477 is offline  
post #16 of 21 Old 03-05-2009, 06:59 AM
Member
 
Join Date: Oct 2008
Location: Racine Wisconsin
Posts: 71
View Wonderwood's Photo Album My Photos
I went to woodcraft to buy the Jet 1220...ended up coming home with the Rikon. It was about $100 cheaper...and that allowed me to get a chuck. I have been turning with it everyday...have had it for 2 weeks...everything works great, however I did have the indexing gears break off from where there mounted...this happened while I was turning...heard a strange noise...turned off lathe, and checked what I though should be checked...started back up...ran great, til I went to remove chuck...and the indexing pen didnt hold the head stock....pen is fine, but the gears are gone...in the process of getting this resolved.....I will let you know how I like Rikons/woodcrafts customer service soon...
Wonderwood is offline  
post #17 of 21 Old 03-05-2009, 09:06 AM
Senior Member
 
Join Date: Sep 2007
Location: Baxter, Tennessee
Posts: 3,257
View john lucas's Photo Album My Photos
That's not a good thing. I have Nova Comet and it uses the index pin to lock the spindle. I questioned them on this and said that it would never break. It hasn't. However they did put a new spindle that had a hex plate added on the new lathes because of customer concern. They sent me one and I replace it but I have never had to use it.
I'm guessing the Rikon parts might be cast instead of turned steel like the Nova.
john lucas is offline  
post #18 of 21 Old 03-05-2009, 10:02 AM
Member
 
Join Date: Oct 2008
Location: Racine Wisconsin
Posts: 71
View Wonderwood's Photo Album My Photos
Another Member said he had the same thing happen...said it was a screw that held the indexing gear on the spindle..said its a easy fix..will attempt it friday
Wonderwood is offline  
post #19 of 21 Old 03-05-2009, 08:55 PM
Junior Member
 
Join Date: Feb 2009
Location: Upstate New York
Posts: 12
View Jack Giovo's Photo Album My Photos
What ever you get I am on board with the variable speed - man it is worth it

Now you have to make a choice - don't rush - it is your hard earned cash.

Jack
Jack Giovo is offline  
post #20 of 21 Old 03-06-2009, 04:15 PM
Member
 
Join Date: Oct 2008
Location: Racine Wisconsin
Posts: 71
View Wonderwood's Photo Album My Photos
Quote:
Originally Posted by Wonderwood View Post
I went to woodcraft to buy the Jet 1220...ended up coming home with the Rikon. It was about $100 cheaper...and that allowed me to get a chuck. I have been turning with it everyday...have had it for 2 weeks...everything works great, however I did have the indexing gears break off from where there mounted...this happened while I was turning...heard a strange noise...turned off lathe, and checked what I though should be checked...started back up...ran great, til I went to remove chuck...and the indexing pen didnt hold the head stock....pen is fine, but the gears are gone...in the process of getting this resolved.....I will let you know how I like Rikons/woodcrafts customer service soon...
Got the Rikon back to work...it was the screw that holds the indexing gear...it had came loose.....it won't do that anymore..
Wonderwood is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Woodworking Talk - Woodworkers Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
What lathe do I need? dgac Power Tools & Machinery 1 01-20-2009 07:35 PM
Old Lathe tamirrajune1965 Tool Reviews 2 11-03-2008 08:10 PM
Help with new lathe Umpqua Woodturning 1 02-15-2008 12:56 PM
Help with a lathe Mysteriouswoodsmen Woodturning 11 01-06-2008 12:43 AM
New Lathe Burlkraft Woodturning 10 08-05-2007 03:07 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome