Woodworking Talk - Woodworkers Forum

Woodworking Talk - Woodworkers Forum (https://www.woodworkingtalk.com/forum.php)
-   Joinery (https://www.woodworkingtalk.com/f5/)
-   -   Getting straight edges for edge gluing boards together (https://www.woodworkingtalk.com/f5/getting-straight-edges-edge-gluing-boards-together-208709/)

woodnthings 12-17-2018 10:41 AM

Regarding the "shooting board", reply post 17 ...
 
I've never seen a shooting board for straightening the long edge of a board, only the shorter ends and miters....? I don't think it would be practical because of the length required.
Here's the old school method of using a hand plane:

Here is my favorite jig for straighten boards using a table saw. I've made it in several lengths. It also works to saw tapers on legs and cut very shallow angles:
https://www.woodworkingtalk.com/f27/...ble-saw-16999/
https://www.woodworkingtalk.com/atta...w-100_1375.jpg

This is not just some half baked approach, but actually works well and produces straight edges way faster than a jointer:
https://www.woodworkingtalk.com/atta...w-100_1835.jpg

There is another method using a "follower", a straight section that rides along the fence with the workpiece:
https://www.woodworkingtalk.com/f2/d...1-4-ply-55717/

https://www.woodworkingtalk.com/atta...y-100_2698.jpg

Pineknot_86 12-18-2018 09:10 AM

wnt, how about a thread on the DC system over the TS blade on the 8/26/2011 photo? I get a lot of sawdust off the blade and that would fit the bill nicely.

gmercer_48083 12-18-2018 01:09 PM

Woodnthings has shown two methods that absolutely work well. Bravo!


All times are GMT -4. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome