Hey guys just thought I'd ask if anyone else tried the resaw blade from infinity cutting tools. I took a chance and ordered one for my 14 inch delta. I'll have to say I just tried it out and so far it is the best finish of any blade I have tried. Guess I'll just have to wait to see how long it lasts. It's a "thin kerf" 5/8 wide 3-4 tpi it cut fast and left a finish that I could easily clean up by hand with a sanding block. I also just tried a Olson all pro at in 5/8 3tpi I believe and got pretty nice results with that as well. All other blades I've used have all been 1/2 and have not been bad like timber wolf and wood slicer I have always stayed away from blades wider than 1/2 cause I've read lots of places that a 14 inch saw just can't tension wider blades reliably but both of the 5/8 I've tried so far have worked great. I have a work bench project out of ash I'm gonna be starting soon and going to have to do a good bit of resawing while I'm gluing up all the stock for legs and stuff. So I thought I'd get some blades on hand before I started. Just thought I'd let you guys know that these blades seem to work really good if anyone saw them and was thinking about trying onel
Last edited by the dude; 08-17-2015 at 09:26 PM.