Wood fill product help! - Woodworking Talk - Woodworkers Forum
 
Thread Tools Display Modes
post #1 of 10 Old 01-04-2015, 01:04 PM Thread Starter
Junior Member
 
Join Date: Jan 2015
Location: central WA state
Posts: 9
View OutintheToolies's Photo Album My Photos
Wood fill product help!

We live in forestland and have milled a lot of our own Doug fir and Ponderosa pine timber for countertops, stairs, etc., which I love. Unfortunately, the front of one of the counter edges obviously had some dry rot which we did not perceive until a couple of years after installation. See photos. Having "dug" back to solid wood, what would you recommend for reconstructing/filling the edge? Would I need to drill in anchors as well (as in concrete) to help hold it? I can fill and sculpt by hand as the edge is somewhat ondulating (natural front vertical edge where bark was removed). What product would you recommend for strong fill? A friend did the construction; I do all the finishing. Countertop has Minwax oil-based polyurethane, but I am ready to refinish it all anyway! Any suggestions would be much appreciated! Happy New Year!
Lynnea

P. S. I created an album for the photos. Learning curve!

Last edited by OutintheToolies; 01-04-2015 at 01:11 PM. Reason: photos did not post
OutintheToolies is offline  
Sponsored Links
Advertisement
 
post #2 of 10 Old 01-04-2015, 02:17 PM
Senior Member
 
Join Date: Sep 2011
Posts: 26,076
View Steve Neul's Photo Album My Photos
Welcome to the club.

There are a number of different ways to fix that. I would probably dig out all the soft and rotten wood I could first. Then mix some bondo with a universal tinting color to match the lighter color of the wood and fill it with that. Then mix some paint to match the darker color of the wood and draw the grain of the wood on with a small artist brush. There are also epoxy products made for that purpose however like the link but I don't have any experience with them. With them you might have to fill the void first and then paint it the lighter color of the wood and then grain it.
http://www.homedepot.com/p/PC-Produc...4113/100664090
Steve Neul is online now  
The Following User Says Thank You to Steve Neul For This Useful Post:
OutintheToolies (01-04-2015)
post #3 of 10 Old 01-04-2015, 08:06 PM Thread Starter
Junior Member
 
Join Date: Jan 2015
Location: central WA state
Posts: 9
View OutintheToolies's Photo Album My Photos
Wow, thank you so much, Steve! Must have been ESP as I was just looking online at products and saw that very one. Then found it cheaper and free Prime shipping on amazon :-) I think I'll just go ahead and order it now!

http://www.amazon.com/s/ref=nb_sb_no...ood+repair+kit

I have a close friend (2 hrs away) who is a very experienced touch-up artist. She has done amazing work making booboos disappear (on fine furniture and yachts) with wood graining and glazing perfect matches. Have watched her work and even traveled with her to some faraway projects. I can do this! (if I get stuck, she's got my back :-) I would have called her on this, but she has already done too many favors when here visiting!!
OutintheToolies is offline  
Sponsored Links
Advertisement
 
post #4 of 10 Old 01-04-2015, 08:30 PM
Senior Member
 
Join Date: Sep 2011
Posts: 26,076
View Steve Neul's Photo Album My Photos
You might want to look at this. It is what I was trying to describe. http://myprojects.diynetwork.com/how...ain/index.html
Steve Neul is online now  
post #5 of 10 Old 01-05-2015, 10:43 AM Thread Starter
Junior Member
 
Join Date: Jan 2015
Location: central WA state
Posts: 9
View OutintheToolies's Photo Album My Photos
Wow, Steve, thank you, again! I have never seen a rocker tool!! My pro friend has an amazing collection of tiny brushes, and I've never seen her do wood graining with anything else. (I'll have to ask her!) She doesn't do much (if any) *completely faux* work, just restoration. I looked on Rockler's website but don't see one - figured I could pick one up next time I head over the mountains to Seattle. This could be handy on the top edge of this counter repair! (the front edge doesn't have grain as it's the part that was below the bark, but I'll have to work on the color variations in it...easy)
How about this one on amazon?
http://www.amazon.com/Marshalltown-E...QD1GVX2BCJ7EDG

I can already think of another place to use it! (ugly fill on a rustic pine bench!) (that's a whole 'nother question as wood fill wouldn't stick to the epoxy fill that I used to fill a pitch pocket :-(
lynnea
OutintheToolies is offline  
post #6 of 10 Old 01-05-2015, 11:55 AM
Senior Member
 
Join Date: Sep 2011
Posts: 26,076
View Steve Neul's Photo Album My Photos
On a pitch pocket you have to take a sharp knife or chisel and cut the sappy spot out. Then the filler will adhere.
Steve Neul is online now  
post #7 of 10 Old 01-05-2015, 12:33 PM Thread Starter
Junior Member
 
Join Date: Jan 2015
Location: central WA state
Posts: 9
View OutintheToolies's Photo Album My Photos
Steve, I had put exterior urethane finish on this bench (thick slab of pine), and the pitch kept coming through (didn't realize it was a pitch pocket until then). So we actually drilled it out (about 1-1/2" deep and about 3" diam) and removed all the pitch. Filled it almost to the top with epoxy stuff, leaving a recess that I thought I would then fill to the top with wood putty stuff. Well, even when we drilled holes in the epoxy to provide "anchor" points, the wood putty would not stick to the epoxy. In the sanding process, it just came loose :-( I should have used wood putty for the entire fill (I guess). So now it's filled to the top with epoxy (clear) so when I get around to it, I'll have to try to paint the spot and faux grain and try to match (my friend could do it and you'd never be able to see the booboo). The slab is a pretty cool shape (curved) - otherwise we'd just cut another slab from our woods and put it on and be done with it! It keeps dropping lower on the priority list! Thanks again for the response!~
OutintheToolies is offline  
post #8 of 10 Old 01-14-2015, 03:33 PM
Senior Member
 
Join Date: Nov 2014
Location: Huntingdon Cambs UK
Posts: 163
View sancho's Photo Album My Photos
Check out wood repair products,

http://www.woodrepairproducts.com

They have some filler that you can color match and repair just about any piece of furntiure etc.

Give them a call they call help you select the right filler.

I have no affiliation with them but I have used their products and Im ready to order some more from them
sancho is offline  
The Following User Says Thank You to sancho For This Useful Post:
OutintheToolies (01-15-2015)
post #9 of 10 Old 01-14-2015, 04:16 PM
Senior Member
 
Join Date: Sep 2011
Posts: 26,076
View Steve Neul's Photo Album My Photos
I have a couple of the brush tip graining pens from Mohawk. They work really good.
Steve Neul is online now  
The Following User Says Thank You to Steve Neul For This Useful Post:
OutintheToolies (01-15-2015)
post #10 of 10 Old 01-15-2015, 10:54 AM Thread Starter
Junior Member
 
Join Date: Jan 2015
Location: central WA state
Posts: 9
View OutintheToolies's Photo Album My Photos
They look great! Thank you both!
OutintheToolies is offline  
Reply

Tags
countertop, dry rot, fir, wood fillers

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Woodworking Talk - Woodworkers Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Best product to fill dips in wood? Dave3 Wood Finishing 7 11-07-2014 02:42 PM
Best fill for wood cracks? p8ge101 Wood Finishing 2 10-30-2014 07:06 PM
How to seal/fill this wood? bobgodd Wood Finishing 20 06-27-2013 11:34 AM
using clear epoxy to fill raw wood cracks pmandra1 Wood Finishing 2 11-01-2010 02:37 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome