Woodworking Talk banner

First Saw Bench

2K views 7 replies 5 participants last post by  Splinters_will_occur 
#1 ·
Well this was my Sunday Project. I will be adding some dog holes for the pipe clamp that it can hold.



 
See less See more
2
#7 · (Edited)
Splinters_will_occur said:
It stands at 19 inches which is my knee height roughly, the pipe clamp will be used in conjunction with bench dog stoppers to hold a piece to the bench better and the top is fairly easy to take off If the need be.
Well, outstanding job, splinters. I hope that you have many, many happy hours using those saw benches.

One suggestion. You don't need to use the pipe clamps. Just put some 3/4" dog holes in there and use hold fasts to secure your work piece.
 
#8 ·
Well, outstanding job, splinters. I hope that you have many, many happy hours using those saw benches.

One suggestion. You don't need to use the pipe clamps. Just put some 3/4" dog holes in there an use hold fasts to secure your work piece.
I was going to look into doing that as well. I just like the option if I need it. The pipe clamp wont be secure to the bench its just an option.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top