ShopMaster Jointer Bearing Replacment - Woodworking Talk - Woodworkers Forum
 
Thread Tools Display Modes
post #1 of 3 Old 09-19-2012, 02:14 PM Thread Starter
Rough Sawn Lumber
 
EWerner's Avatar
 
Join Date: Oct 2010
Location: Minnesota
Posts: 196
View EWerner's Photo Album My Photos
ShopMaster Jointer Bearing Replacment

I have a '55 Shopmaster 6" jointer that the bearings are starting to go out as they are starting to sound load. Are these hard to replace and does anyone know a good source to get new bearings? When I get home I can look to see what is stamped on the bearings, hopefully.

Thanks
EWerner is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 09-19-2012, 04:50 PM
Half a bubble off.. {ΘΘ}
 
Join Date: Aug 2012
Location: "Downeast" Maine
Posts: 549
View J Thomas's Photo Album My Photos
If you can get an ID on the bearings you might be able to cross reference them on the Timkin site. Heres a link to their PDF cross-reference.
http://www.timken.com/pl-pl/products...ence_Guide.pdf
If no ID.. take them to your local auto parts store for a match up.
Good luck..
..Jon..
J Thomas is offline  
post #3 of 3 Old 09-20-2012, 02:19 PM Thread Starter
Rough Sawn Lumber
 
EWerner's Avatar
 
Join Date: Oct 2010
Location: Minnesota
Posts: 196
View EWerner's Photo Album My Photos
Quote:
Originally Posted by J Thomas View Post
If you can get an ID on the bearings you might be able to cross reference them on the Timkin site. Heres a link to their PDF cross-reference.
http://www.timken.com/pl-pl/products...ence_Guide.pdf
If no ID.. take them to your local auto parts store for a match up.
Good luck..
..Jon..
Thanks. I looked this morning and from what I can see it is stamped with Norma 203PP. What I can find on the internet is that 203PP is 17mm bore, 40mm OD and 12mm wide so I will remove the bearings and mic them to see that they match those specs. Just using a vernier caliper with out removing them they where 11/16" x 1 9/16" and unable to get the width.

Eric

Last edited by EWerner; 09-20-2012 at 02:51 PM.
EWerner is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Woodworking Talk - Woodworkers Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Shopmaster 6 inch jointer dat Power Tools & Machinery 1 08-20-2012 03:21 PM
Knife replacment Delta 22-540 pickngrin Power Tools & Machinery 3 06-15-2011 11:54 AM
Craftsman 15gallon 3hp Air Compressor Fan Blade Replacment upnorf Power Tools & Machinery 0 03-10-2010 07:44 PM
Delta Shopmaster Bandsaw TheRecklessOne Tool Reviews 9 02-25-2009 11:30 PM
Replacment arbor nut, Craftsman 10"???? pickngrin Power Tools & Machinery 2 08-28-2008 10:59 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome