Dewalt 735X planer feed problem
Hi All. This is my first post... I bought a new 735X and have been using it successfully for only a few days. Suddenly it won't feed the board. I took it apart and there are no clogs, broken chains or belts. When I pulled off the front cover I can see the problem is that the right shaft turns but not the sprocket (see attached photo, note that it uploaded upside down for some reason). I haven't disassembled everything but my guess is that the sprocket should be attached to the shaft with a key and the key broke. Does anyone know if that's the case? If so, any idea what size key? I didn't see it on the exploded diagrams here https://servicenet.dewalt.com/Produc...ctedType=21176
. If there's no key required, any other solution all you Good Forum Members can offer? :D Thanks in advance for any advice.
Last edited by adannenberg; 07-04-2019 at 03:15 PM.
Reason: for some reason the photo uploaded upside down.