Join Date: Mar 2009
Location: Casa Grande, AZ
I don't use it for trim, only 16d and 8d framing nail and also sheeting nails. Trim is so easy that I pull the trim off with a small thin pry bar and knock the nail through with pliers then grabbing the heads on the other side to pull them out. It's so easy and fast that it would be ridiculous to drag an air hose around to do it. Hell I would have the nails already pulled before the compressor even filled up with air. I pulled all the base board trim for the entire 5 bedroom house and removed the nails in a little over an hour maybe 2 hours at the most
This time around I was pulling 4'x8'x3/4" T&G sub-flooring so I couldn't get to the edge to pry it up first and had to pull all the nails before removing the plywood
Iím a die hard DIY guy. Donít tell me to hire someone for what I can do myself.