Woodworking Talk - Woodworkers Forum - View Profile: Steve Neul

Steve Neul Steve Neul is offline


  Visitor Messages

Showing Visitor Messages 1 to 10 of 18
  1. Maintenance Man
    02-24-2017 09:28 AM - permalink
    Maintenance Man
    Hi, I posted a new thread in Project Showcase titled Red Oak End Tables. I'm not sure why but my pics always post upside down. I noticed that you were able to fix that the last time I posted pics. I'd appreciate it if you could do the same for this thread. Sorry for any inconvenience.

  2. Steve Neul
    02-17-2017 06:37 PM - permalink
    Steve Neul
    Silicone adhesive will hold very well to plastic but you are correct, it doesn't get hard.
    I was under the impression the lexan was sitting in a dado. I don't know of any adhesive you could edge glue a thin piece of lexan. If it's being glued to another piece of lexan they make a special adhesive just for the plastic but I don't remember what we used. I haven't done any plastic work since 1994.
  3. col. jim
    02-17-2017 02:49 PM - permalink
    col. jim
    Thanks Steve! I will try that but I think I'm doomed with this one. The reason I did not use the clear silicone caulk before is I was told it would not dry solid. Can you advise on that? I have the .093 poly standing on it's edge on the edge of the tread. Will the Silicone hold it tight enough do you think?
  4. GEMcooter#2
    01-17-2017 05:21 PM - permalink
    I am trying to load from a desk top. I get all ready to up load,press upload and wait as it says. I wait until it says upload failed because of missing security icon.
  5. Thomas Holzwurm
    12-17-2016 10:03 PM - permalink
    Thomas Holzwurm
    Hi, Steve. I see that you are a moderator on this forum. I would love to find some like minded wood workers in my neighborhood. Do you know if there is a way to find anybody who lives here in Regina, Saskatchewan.
    Would it be O.K. to post the question?
    "Looking for fellow wood workers in or around Regina, Saskatchewan?"

    Thanks, Steve,

  6. toniqqqq
    10-04-2016 02:33 AM - permalink
    Maybe i used the wrong terminology. I have an older house, built in the 1960s. The kitchen has vinyl tile that i am going to replace. Problem - underneath the tile is pine 3/4 inch (Real 3/4 inch.) plywood. and underneath that is 1x6 subflooring which is in good condition All i can find today is 23/32 which is noticeably different. I only need to replace 1/2 of the kitchen due to waterleakage and deterioration. Suggestions?
  7. difalkner
    03-21-2016 09:05 AM - permalink
    Hey Steve,

    I'm always curious when something happens to a member but usually don't ask. However, I had a notification of a post quote and when I clicked on it I saw it was Stefano Lombardo and all his posts have been deleted. What did he do? I did notice he came in 'hot' unlike most who sort of move slowly into posting and commenting.

    Just curious, is all...

  8. Steve Neul
    03-20-2016 04:54 PM - permalink
    Steve Neul
    I hope they re-formulate the Valspar tractor paint. The stuff is terrible.
  9. RandyReed
    03-20-2016 04:39 PM - permalink
    Sherwin williams is going to acquire Valspar for 11.3 billion. Just thought I would pass this on.
  10. dsmin
    01-06-2016 11:59 AM - permalink
    It would be tough Steve. The pressboard goes edge to edge on the slate. It is used to attach the three pieces to the wood frame of the table and to staple the felt tightly. You know what happens to pressboard when it gets hammered into or stapled etc. Pieces break off and converts back to sawdust pieces. I would have to shave/saw off from the slate and glue new pieces on to the edge. These slates are close to 300 pounds each and are difficult to work on without damaging them. I came to the conclusion some sort of filler might be the best option. But I have never tried this on pressboard. It is an interesting situation isn't it? Like you, I have dealt with countless weird possibilities with wood, but this one is new to me since I try to never use pressboard under any circumstances. I appreciate your input. It was a good idea.


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 10:18 AM
  • Join Date: 09-02-2011


Showing Friends 1 to 6 of 6


10:52 AM - zrodimel mentioned Steve Neul in post Help identifying style of desk
... prettier top ;) Steve Neul, Al_Amantea: I promi...
12:59 AM - John_S_804 mentioned Steve Neul in post Craftsman Radial Arm Saw will not elevate
...saw back together. Steve Neul: If and when I get t...
12:12 PM - new2woodwrk mentioned Steve Neul in post The bane of my existence - drawer questions please
@Steve Neul - I think that chann...
04:09 PM - Cricket mentioned Steve Neul in post
04:04 PM - Cricket mentioned Steve Neul in post
03:53 PM - Cricket mentioned Steve Neul in post
05:55 PM - Cricket mentioned Steve Neul in post


11:47 AM - shoot summ quoted Steve Neul in post 18" Walnut Lazy Susan
If you plan on using the cuttin...
09:39 AM - difalkner quoted Steve Neul in post 18" Walnut Lazy Susan
If you plan on using the cuttin...
11:36 PM - Steve Neul quoted Phyberoptic in post Jointing long boards
Thanks, I'll give that a try in ...
10:52 PM - Toolman50 quoted Steve Neul in post Antique Craftsman Table Saw
It's not your saw but I finally...
06:57 PM - Steve Neul quoted LimaDon in post Antique Craftsman Table Saw
Hi, We have a 1946 Builder...
02:57 PM - Steve Neul quoted Kimberly T in post Making a vanity top water proof and resistant to daily wear and tear
Good advice, should have made i...
09:45 PM - Steve Neul quoted Robc84 in post Need Help Getting Started
So I've just decided that I...
07:21 PM - Steve Neul quoted Brian(J) in post Recommendation needed: Tap, to cut threads in hardwood
I often recommend a couple co...
07:17 PM - Brian(J) quoted Steve Neul in post Recommendation needed: Tap, to cut threads in hardwood
Threads from a metal tap are so...
05:12 PM - MT Stringer quoted Steve Neul in post Filling in tabletop.
The holes are too big to fill. ...
04:22 PM - Steve Neul quoted rbarrett77 in post Lazy Susan for Vinyl
Thank you, Steve! Now that I k...
08:26 AM - Steve Neul quoted cstowers in post North Texas Lumber Yard??
Hello all, Does anyone that...
07:52 AM - Steve Neul quoted renraw9002 in post Shellac vs oil-based polyurethane
Dang. Yea I can't wait that lo...
01:10 AM - renraw9002 quoted Steve Neul in post Shellac vs oil-based polyurethane
Polyurethane also dries a lot q...
12:32 AM - TimeTurnsElastic quoted Steve Neul in post General Finishes Sanding Sealer & Enduro-Var
Steve, thank you, you're a maes...
09:43 PM - Tennessee Tim quoted Steve Neul in post Difficulty with a Simple Box Live Edge Red Cedar.
That much of a cup warp you are...
07:04 PM - Steve Neul quoted Bennieberry3 in post Mini-Indy
I would like a set of your plans ...
06:08 PM - Steve Neul quoted woodnthings in post Craftsman 315.22580 switch
That would not only be dangerous...
05:12 PM - woodnthings quoted Steve Neul in post and that would be ....
Most of the rigged sanders I've...
08:32 PM - Quickstep quoted Steve Neul in post Shellac vs oil-based polyurethane
Polyurethane also dries a lot q...
For the best viewing experience please update your browser to Google Chrome