Woodworking Talk - Woodworkers Forum - View Profile: MT Stringer

MT Stringer MT Stringer is online now

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. Old Coot on a Bike
    02-17-2017 08:39 AM - permalink
    Old Coot on a Bike
    I saw a photo of your miter saw station on one of your posts. (I'm guessing your camera lens cost a little more than the saw!), and have a few questions.

    Is it your design? If so, do you have plans you could share?
    What is the purpose of the cutouts on the side support boxes? Just to permit clamping?
    What is the purpose of the vertical piece of wood inside the box that is closest to the camera?

    Thanks!
    Bret Sutton
  2. WoodMachiner
    11-18-2013 09:22 AM - permalink
    WoodMachiner
    Thanks for the information. After I posted my question I remembered I recently found a pneumatic cylinder in a box of stuff my dad gave me. I think I can modify it to make it work. I am going to hop over to Ebay and look for the pedal.
  3. MT Stringer
    11-16-2013 06:15 PM - permalink
    MT Stringer
    Search eBay for "4way pneumatic foot pedal" sold by Industrialsalws719.

    The rest of the stuff came from fright props.com. Look in their "pneumatic part" section. They have a good video where the guy discusses what parts are needed.

    Air hoses came from Harbor Freight.
  4. WoodMachiner
    11-15-2013 02:42 PM - permalink
    WoodMachiner
    So I have been following your post on modifying your Kreg Jig, where did you end up sourcing your cylinder and pedal? I have been thinking about modifying my setup in a similar fashion.

    Thanks

  About Me

  • About MT Stringer
    Biography
    Sports/wildlife photographer, long time amateur carpenter
    Location
    Channelview, Tx
    Interests
    Fishing, photography
    Occupation
    Retired! :-)

  Statistics

Albums
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 08:08 PM
  • Join Date: 07-21-2009

  Friends

Showing Friends 1 to 1 of 1
  • bearman
    • bearman is offline

  Mentions

02-06-2017
10:26 PM - MT Stringer mentioned Toolman50 in post Smallest motorized saw for straight cuts?
Toolman50 ...and others intere...
02-01-2017
01:06 PM - MT Stringer mentioned Catpower in post Osborne v Incra miter gauges?
Catpower - I found them on A...
09-05-2016
06:11 PM - MT Stringer mentioned mulak in post tools recommendation for a newbie
mulak - I found some readi...
06-16-2016
01:07 PM - MT Stringer mentioned WOOD in post Advice on tools for advancing my shop & skills
@wOOd - I mentioned the pl...
11-07-2015
02:16 AM - MT Stringer mentioned BernieL in post Workbench top attachment
BernieL - I remember seeing ...
08-25-2015
06:44 PM - codeguruakshay mentioned MT Stringer in post Nespresso Coffee Pod Holder
...ould like to thank MT Stringer for his help in gett...
08-10-2015
05:54 PM - MT Stringer mentioned Harry in post First Project- How would I stain wood like this?
Harry - if you look at my ...

  Quotes

03-27-2017
04:12 PM - MT Stringer quoted FTG-05 in post Just bought a NTM Table Saw - Worth getting a Riving knife for it?
Ok, I think I see a growing...
03-23-2017
12:18 PM - MT Stringer quoted ahammad in post Help! My drawers are not square!
Hello everyone. I recently ...
03-16-2017
07:34 PM - Techsniffer quoted MT Stringer in post Router table cabinet help and ideas
I think the pros of mdf are it p...
02:34 PM - MT Stringer quoted Leo G in post What did you do today?
Damn.... that's yellow. I...
11:36 AM - MT Stringer quoted OutdoorSeeker in post Router table cabinet help and ideas
And like MT said show us pictures ...
03-15-2017
10:41 PM - Techsniffer quoted MT Stringer in post Router table cabinet help and ideas
you can start out with the basic...
06:14 PM - MT Stringer quoted bill.marshall.94 in post Garage Cabinet
Should you add a sealent or stain if ...
04:11 PM - MT Stringer quoted Dodis in post Work Tables, stations, etc. an idea
StampBear, And for the tab...
12:25 PM - MT Stringer quoted StampBear in post Work Tables, stations, etc. an idea
Yes, I have a circular saw. Sp...
03-13-2017
11:03 PM - MT Stringer quoted MatthewEOD in post Learning Sketchup
http://sketchupforwoodworkers.c...
04:56 PM - MT Stringer quoted sanchez in post Work Tables, stations, etc. an idea
Do you have a circular saw? ...
03-11-2017
10:22 PM - MT Stringer quoted StampBear in post Work Tables, stations, etc. an idea
Please forgive me. I'm replyin...
12:20 PM - MT Stringer quoted StampBear in post Work Tables, stations, etc. an idea
I checked him out. His station...
03-10-2017
05:40 PM - MT Stringer quoted IAMAFREEMAN in post Delta unisaw
...ts and curiousity. IAMAFREEMAN Just an FYI for a f...
03-03-2017
09:25 PM - MT Stringer quoted OutdoorSeeker in post Looking to buy a new router.
MT Is Formica the same type of mat...
03-02-2017
04:46 PM - MT Stringer quoted FrankC in post Trying to Build My First Table-- Help??
Everytime I watch that vide...
11:18 AM - MT Stringer quoted canarywood1 in post Looking to buy a new router.
A two hp machine is not big enou...
10:53 AM - canarywood1 quoted MT Stringer in post Looking to buy a new router.
The fixed base is attached to a ...
06:02 AM - epicfail48 quoted MT Stringer in post GIVEAWAY: Triton Dual Mode Precision Plunge Router TRA001
Congratulations!!!!! I'm glad f...
03-01-2017
01:36 PM - MT Stringer quoted canarywood1 in post Looking to buy a new router.
Your right, although i never cou...
 
For the best viewing experience please update your browser to Google Chrome