Jim Frye Jim Frye is online now
- About Jim Frye
- Retired from 41 years in the IT profession. I've been a woodworker for over 30 years.
- Northwest Ohio
- Retired IT professional
- Jim Frye
The Nut in the Cellar
I've gone out to find myself. If I return before I get back, have me wait for me.
- Jim Frye
- Total Albums: 2
- Total Pictures: 46
- Albums Created by Jim Frye
- Last Activity: Today 09:38 PM
- Join Date: 08-23-2016
|02:59 PM - madmax quoted Jim Frye in post Ryobi 10" table saw, 15 AMP - good enough?
Which model of Ryobi are you ...
|06:21 PM - Michael_JL quoted Jim Frye in post Can I get away with no jointer and just a planer?
Technically, the two machines...
|09:19 PM - shoot summ quoted Jim Frye in post Does This Drill Bit Exist?
If you are only doing a few I...
|07:29 PM - Jim Frye quoted GeorgeC in post Wood Gone Bad (case hardening)...
Reads like a saw blade probl...
|11:32 PM - mulak quoted Jim Frye in post Woodworking in an apartment/condo... possible?
In an apartment or condo you ...
|02:05 PM - Jim Frye quoted sanchez in post mounting my table saw to the wall !
I can't believe nobody asked...
|06:33 PM - Jim Frye quoted Wayne Twaddell in post Wood splitting
It sat there for a good 5 minutes b...
|08:59 AM - joek30296 quoted Jim Frye in post Making Thin Appliques
Thanks. I only need two of t...
|09:03 PM - Steve Neul quoted Jim Frye in post Why do I get these funny marks on emails.
What program are using to vie...
|04:57 PM - Rodrat quoted Jim Frye in post What type of wood is this?
Yes, I was trying to find a ...
|09:32 AM - Jim Frye quoted Rodrat in post What type of wood is this?
Judging by the grain in the...
|01:35 AM - Rodrat quoted Jim Frye in post What type of wood is this?
If it's naturally finished, i...
|09:05 PM - Sleeper quoted Jim Frye in post Caster wheel clearance question?
How much weight will this car...
|07:18 PM - Jim Frye quoted mendozer in post opinion on clamps
regarding marking wood, does ...
|05:45 PM - ColorStylist quoted Jim Frye in post Wood Dye Recommendations Please
Forgot about SW. The painter...
|05:56 PM - Tennessee Tim quoted Jim Frye in post Spalted Wood...
I was at the local hardwood d...
|01:16 PM - bobmane quoted Jim Frye in post shoe mold or similar in gap
Great tips on the drywall app...
|09:59 AM - Jim Frye quoted mendozer in post opinion on clamps
smart to do shorter lengths w...
|07:03 PM - Tennessee Tim quoted Jim Frye in post When is quarter sawn wood needed?
And if it's finished on all s...
|09:56 AM - Jim Frye quoted epicfail48 in post trivets
After 4 years he's either found...