Woodworking Talk Logo
    Forum     Photos     DIY Forum     Contact Us  
Designs | Joinery | Trim Carpentry | Woodturning | Wood Finishes | Tools| Project Showcase
Go Back   Woodworking Talk - Woodworkers Forum > Shop Talk > Design & Plans
dbhost  10x16 gambrel barn with loft dbhost 10x16 gambrel barn with loft
Register Woodworking Photos FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 01-27-2009, 11:20 PM   #1
Handyman
Senior Member
 
Handyman's Avatar
 
Join Date: Jan 2008
Location: Amidst of 1000 acers of crawfish ponds under a 500 year old Oak grove. SW La
Posts: 1,289
View Handyman's Photo Album My Photos

Old Gallery
Send a message via AIM to Handyman
Default dbhost 10x16 gambrel barn with loft

Quote:
Originally Posted by dbhost View Post
All I want is a 12x16 gambrel barn with a loft..
I built this 10 x 16 barn style shed to store lumber and some tools. I built it for less that $700.00 But I dont think you could duplicate it for that. I got some great deals on wood. The 2 runners under it are 4x6 creasote. The floor joist and studs and rafter are all glued together. Basicly I built frames or ribs. I built the first one and used it for the pattern for all the rest. As I stood them up I nails 1x4s on the inside untill I nailed the T111 plywood siding on the outside. Every place wood touches wood, it is glued with yellow wood glue. The floor is one layer of 1" toung & groove plywood. The roof is 1/2 plywood, tarpaper and 3 tab shingles and it has a 12" wirly bird vent. The 4ft french door unit was donated by my employer. All the rafters was made from scrap 2x4x4ft and the truss plates where scrap 1/2 plywood. Every crack and seam was caulked after it was built. I did this because I was going to be storing cabinet grade plywood in it and I didnt want to have a bug/tree roach problem. I think it could be built fairly cheep though.
Attached Images
    
__________________
Collector of Old Tools
Fixer of all things broke
Expert = Drip under pressure
Handyman is offline   Reply With Quote
Join Contractor Talk

Join the #1 Woodworking Forum Today - It's Totally Free!

Do you love woodworking? Are you looking to connect with other woodworkers? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's the leading place for woodworkers to meet online. No matter what your skill level you'll find that WoodworkingTalk.com is a great community to join. Best of all it's totally free!

Join WoodworkingTalk.com - Click Here JOIN FOR FREE

Also view our DIY Forum here

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. WoodworkingTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any woodworking or home improvement task!
Old 01-27-2009, 11:39 PM   #2
Kenbo
HALL OF FAMER
 
Kenbo's Avatar
 
Join Date: Sep 2008
Location: Toronto, Ontario, Canada
Posts: 1,074
View Kenbo's Photo Album My Photos

Old Gallery
Default

That's some sweet lookin shed!!
__________________
I might say a few words to lighten a situation, but that doesn't mean that I take the situation lightly.
Kenbo is offline   Reply With Quote
Old 01-28-2009, 09:25 AM   #3
mdlbldrmatt135
Senior Member
 
mdlbldrmatt135's Avatar
 
Join Date: Dec 2006
Location: Olean, Ny
Posts: 629
View mdlbldrmatt135's Photo Album My Photos

Old Gallery
Send a message via MSN to mdlbldrmatt135 Send a message via Yahoo to mdlbldrmatt135 Send a message via Skype™ to mdlbldrmatt135
Default

For the amount of space getting taken up in my shop by stores... I'm thinking a small shed might not be a bad idea.
mdlbldrmatt135 is online now   Reply With Quote
Old 01-28-2009, 09:37 AM   #4
firehawkmph
Sawdust Maker
 
firehawkmph's Avatar
 
Join Date: Apr 2008
Location: Near Cleveland, Ohio
Posts: 2,264
View firehawkmph's Photo Album My Photos

Old Gallery
Default

Handy,
Nice job on the shed. I love building sheds. They are great projects to do and fun to boot. Every time I used to build a shed or a garage for somebody else, and I stood inside when it was done, I wanted to run home and build one for me. Something about a brand new storage space that's cool.
Mike Hawkins
firehawkmph is online now   Reply With Quote
Old 01-31-2009, 01:54 AM   #5
dbhost
Thumb Nailer
 
dbhost's Avatar
 
Join Date: Jan 2008
Location: League City, Texas. A.K.A. Hurricane Alley
Posts: 1,051
View dbhost's Photo Album My Photos

Old Gallery
Default

Yeah, the whole reason / thinking behind it is twofold.

#1. LOML wants to park the car in the garage.

#2. I measured out what I am currently working in, because the garage has all the lawn and garden, BBQ, camping gear etc... and I am currently squeezed into 10' x 10' working space. 12x16 would feel cavernous, and with it being a dedicated space, I could actually keep LOML from moving her flower pot projects onto my workbench...

Both my city, and my HOA want engineered drawings for the project, which I cannot provide without either hiring an engineering firm, or buying pre done plans. Which brought me to http://www.barnplans.com/minibarn.html and while there are cheaper plans out there, this is one of the few commercially available plan sets that meet the standards.

I talked with a friend of mine that recently put up a larger version as a garage, and his ran $5,000.00 or so with a poured concrete slab, insulation, and electrical.

Another advantage of this particular plan is ceiling height. At least in the 16x24' size it has an 8' ceiling before the supports for the loft.

I figure I am going to have to chuck my quarters into a REALLY big jar to get this done...

12x16 = 192 sq ft, plus the loft, which I figure I will build out to 12x12. Max out as much area as I can while still allowing for passing larger material up. I have a Window unit AC that the box says is good for 400 sq ft, I plan on using that, and my radiator for climate control, bringing 60 amp electrical service in, and insulating the snot out of it...

A couple of items that are going to push my cost up, and I am bargain hunting for those are...

#1. Windows. Since I am in a coastal county, my new install windows have to be rated for Category 3 hurricanes.
#2. Siding. I don't want to mess with it once it's on, so Hardi Panel here I come!
#3. Peg board line all the walls. If I want to hang a hook somewhere I am going to be able to!
__________________
-- Trying to follow the example of the master...

Last edited by dbhost; 01-31-2009 at 02:06 AM.
dbhost is offline   Reply With Quote
Old 01-31-2009, 02:09 AM   #6
Handyman
Senior Member
 
Handyman's Avatar
 
Join Date: Jan 2008
Location: Amidst of 1000 acers of crawfish ponds under a 500 year old Oak grove. SW La
Posts: 1,289
View Handyman's Photo Album My Photos

Old Gallery
Send a message via AIM to Handyman
Default

I bought a set of plans from Lowe's or home Depot for $19.00 or so. I didnt follow the plans, I just needed a place to start.
__________________
Collector of Old Tools
Fixer of all things broke
Expert = Drip under pressure
Handyman is offline   Reply With Quote
Old 02-08-2009, 04:48 AM   #7
jana88
Member
 
Join Date: Jan 2009
Posts: 33
View jana88's Photo Album My Photos

Old Gallery
Default

Nice job. :) Great storage.
__________________
The Hardware City
jana88 is offline   Reply With Quote
Old 05-24-2009, 11:13 PM   #8
dbhost
Thumb Nailer
 
dbhost's Avatar
 
Join Date: Jan 2008
Location: League City, Texas. A.K.A. Hurricane Alley
Posts: 1,051
View dbhost's Photo Album My Photos

Old Gallery
Default

Due to the current economic / job climate, my tax load went up, while my household combined income took a huge hit (LOML got laid off). The shed project is on temporary hold. We have decided to snowball our existing debt until it is gone, and save up for a shed (no using credit at all here).

So for the time being... I am busting my chops trying to finish a couple of home projects (Roofing, fence, and some landscaping remodeling) that will allow me to make the space for the shed... (bye bye nasty old deck I never used, bye bye Crepe Myrtle, and Hibiscus in the middle of the yard (prior owners placement, NOT mine...) and lastly... Bye Bye to the elm tree that is way too close to my foundation...

In goes patio of recycled red brick pavers (recycled from a friend's property). The plan is to lead the patio right up to where the foundation for the shed will be laid out.

With any luck, I should be free of a couple of credit cards, and the rest of my truck payment by this time next year and stashing cash away for the shed...

Of course if anybody wants to donate to the help dbhost build a shed fund, PM me and I will send you info on where to send the funds... (Can you blame a guy for trying?)
__________________
-- Trying to follow the example of the master...
dbhost is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode
Hybrid Mode Switch to Hybrid Mode
Threaded Mode Switch to Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reclaiming barn beams? mranum Forestry & Milling 2 04-22-2008 01:19 PM
Barn siding of any use? gzecc General Woodworking Discussion 4 03-09-2008 05:52 PM
Loft Bedroom cabinetman Project Showcase 7 01-25-2008 10:45 AM

Top of Page | View New Posts

All times are GMT -4. The time now is 08:28 PM.

Contact Us - Woodworking Forum - Top

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0
Woodworking Talk © 2005 - 2009 The Building Network LLC
Our Network: Contractor Forum | DIY Forum | Painting Forum | Electrician Forum | Drywall Forum