This is going to be embarrassing. I am very new to all of this. I just discovered that I enjoy wood working and this was my forth project. While buying stain at a local store I seen on the shelf this product that states its pour on and is like up to 20 something coats of brush on. So I thought I would try it.
I only put it on the top of the coffee table I built. The problem came when I was removing the strips I clamped in place to prevent the excess from pouring over the side, as the table was flat. When I removed the strips the product was dry enough to not run freely anymore but was still wet enough to cling to the striping and completely destroyed the table top. No problem. I can remove and re build the top.
The question is. I want to use this product again but need advice, as I have not been able to locate it in my searching, on how to prevent the same thing from occurring again. Would painters tape prevent the bonding to any retainer I put in place?
Thanks in advance for any and all help.
I only put it on the top of the coffee table I built. The problem came when I was removing the strips I clamped in place to prevent the excess from pouring over the side, as the table was flat. When I removed the strips the product was dry enough to not run freely anymore but was still wet enough to cling to the striping and completely destroyed the table top. No problem. I can remove and re build the top.
The question is. I want to use this product again but need advice, as I have not been able to locate it in my searching, on how to prevent the same thing from occurring again. Would painters tape prevent the bonding to any retainer I put in place?
Thanks in advance for any and all help.