soniferry

I would like to get into wood crafting, but I don't know where to start. I have considered carving, wood burning, building things, etc. But I am not sure where to start.......and I need to find something fairly inexpensive........can someone help? And where can I buy supplies.

__________________
Office Desks

Just Bill

Depends on what you want to build. Carving requires one type of tools for cutting, shaping. Cabinets, furniture, etc., requires a completely different and much more expensive type of tooling, power saws, drills, planers, etc, and lots of space. Turning requires cutting tools and a lathe. Etc., etc., etc.There are lots of books on the subject. Take a look thru home store libraries or , Borders.

woodnthings

I see by your post that you are from the UK, so I can't advise on supplies, unless online, but if I were you I'd go to www.woodmagazine.com and check out their free online videos. There is a box on the page marked free in small print, the others require a subscription. They show a lot of techniques and tools of varoius types. Just to get some idea of what's out there. Bill

__________________
Never stand directly in front of a horse or tablesaw that's running!
If you're not making dust, you're gathering it. After I reread my own posts, I agree with myself even more.

Kenbo

It's truly hard to suggest where you should start if you really aren't sure what it is that you want to do. My suggestion would be for you to go through the project showcase section of this forum. Don't just stop at the first page. Take the time to go through the projects. There are a wide variety of talents and styles here and when you see a photo that makes you think, "I would like to make that", then look into it further. It may give you some idea of which line of woodworking you want to venture into.
Ken

__________________

AZ Termite

I would have to agree with Kenbo. Woodworking should be something that you like to do and want to do. If you don't like what you are doing, most likely you will lose interest in it. You have to have a want and a passion for what you are doing. I love the way fresh cut wood smells, and to see a project that is finished. It gives you pride in ownership to know that you did that. I have evolved in the things that I make over the years. I started with simple cabinets and have gotten into doing a lot of turning. Bowls, pens, rolling pins are mostly what I turn. I made cutting boards to match rolling pins and have sold some as sets and have given others as gifts.
The main thing is to really figure out what it is that interests you and go from there. I would do a lot of looking to figure out which direction you want to go. I would say not only look here at the project showcase, but search the web until you know for sure what really gets your blood flowing.

__________________
Assumption is the mother of all foul -ups

firehawkmph

Soni,
You may want to visit your local library and see if they have some videos on woodworking projects. Take a few home and watch and see what's involved in each and that may help you decide what direction to go towards.
Mike Hawkins

cowchaser

I will tell you this. I have been turning for a around 2 years. It may not look like an expensive hobby, but by the time you start buying all the supplies for this that and the other, it get's there real quick. Others can comment more on the other woodworking options.

Problem is your going to have to decide what it is that you want to do then some can offer more direct advice to you.

windstorm

Ditto what Kenbo, AZ, Mike & the others have been saying. Like a lot of folks, I got interested in woodworking when I saw a wood project I liked & asked myself, "I wonder if I could make that?" Also, if you go to PlansNow.com (as well as other sites that sell woodworking plans), each plan will tell you what skill level it takes & what tools you'll need to build a specific project. But even before you do that, you might want to start with something really simple & get used to working with some hand tools, before you spend your money on electricity. Good luck.

jeffreythree

You might look around and see if any classes are offered in your area. Over here in the US a community college may have a course and Woodcraft stores(and others) have some classes every now and then. These could let you know what path you want to go down before buying expensive tools.

__________________
Some people collect tools, I collect wood Now as complete trees, too!
http://texaswoodlot.blogspot.com
http://jtcwoodcrafts.etsy.com

Gerry KIERNAN

Start small and simple. I tend to shape my projects based on available materials. Look around in your area and see if there is any free wood to be had. Warehouse districts can be a good source for crate material. Construction sites are another possibility. Don't forget to ask if it's okay to take it. Once you have some material to play with think of a project to build. Maybe a small tool box, birdhouse, or a small carving. If you enjoy what you are doing you will see areas that you would like to pursue further. Do not go out and buy a cabinet full of expensive tools until you know what you feel is going to give you satisfaction for a period of time.

The most important things are to have fun, learn as you go, and enjoy your work.

Gerry