Woodworking Talk Logo
    Forum     Photos     DIY Forum     Contact Us  
Designs | Joinery | Trim Carpentry | Woodturning | Wood Finishes | Tools| Project Showcase
Go Back   Woodworking Talk - Woodworkers Forum > Tools, Materials & Safety > Power Tools & Machinery
Delta-Rockwell 28-300 14" bandsaw problem Delta-Rockwell 28-300 14" bandsaw problem
Register Woodworking Photos FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 01-08-2009, 07:33 PM   #1
Workboat
Junior Member
 
Join Date: Jan 2009
Posts: 1
View Workboat's Photo Album My Photos

Old Gallery
Default Delta-Rockwell 28-300 14" bandsaw problem
Folks, I've got a variable speed wood/metal D/R 14" band saw and the shifting mechanism will not work. When it is set to connect to the reduction gearbox for metal cutting it appears to not be engaged. The shifter was very frozen up and I have freed it but it doesn't seem to connect. Anybody else have any experience like this? Thanks,

Workboat
Workboat is offline   Reply With Quote
Join Contractor Talk

Join the #1 Woodworking Forum Today - It's Totally Free!

Do you love woodworking? Are you looking to connect with other woodworkers? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's the leading place for woodworkers to meet online. No matter what your skill level you'll find that WoodworkingTalk.com is a great community to join. Best of all it's totally free!

Join WoodworkingTalk.com - Click Here JOIN FOR FREE

Also view our DIY Forum here

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. WoodworkingTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any woodworking or home improvement task!
Old 05-18-2009, 01:42 PM   #2
xairdale
Junior Member
 
Join Date: May 2009
Posts: 2
View xairdale's Photo Album My Photos

Old Gallery
Default Model 28-300
There are 4 clutch dogs that have to interlock, the drive should clutch in if you press in on the handle while turning the drive pulley a maximum of 90 degrees. I had the same problem and finally was able to get the durn thing to lock in.
xairdale is offline   Reply With Quote
Old 05-18-2009, 01:45 PM   #3
xairdale
Junior Member
 
Join Date: May 2009
Posts: 2
View xairdale's Photo Album My Photos

Old Gallery
Default
Oh, by the way the shifter only engages/disengages the wood cutting drive.
xairdale is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode
Hybrid Mode Switch to Hybrid Mode
Threaded Mode Switch to Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is this a good bandsaw - Delta 12" nbruckelmyer Power Tools & Machinery 1 11-13-2009 12:20 PM
Feed Problem with Rockwell 22-401 Planer geraldvg Power Tools & Machinery 6 12-16-2008 09:02 PM
Delta 14" Bandsaw riser kit DeputyMike Power Tools & Machinery 1 11-01-2008 05:06 PM
Delta / Rockwell 9" Builders tablesaw Woodchuck1957 Power Tools & Machinery 13 10-05-2008 11:05 AM
Blade length for 20" Rockwell Model 28-350 bandsaw tgogary Power Tools & Machinery 5 03-26-2008 09:55 PM

Top of Page | View New Posts

All times are GMT -4. The time now is 12:17 AM.

Contact Us - Woodworking Forum - Top

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0
Woodworking Talk © 2005 - 2009 The Building Network LLC
Our Network: Contractor Forum | DIY Forum | Painting Forum | Electrician Forum | Drywall Forum