porta mill

I have a delta rockwell planer modle 22-401 I need the belt that turns the knife assembally , called alll over the east coast today everyone tells me obsolite no longer aviable. called delta tech dept they gave me the type and out side circumfrence but no know supplier .it is a very narrow belt maby 3/8 inch wide by 66 15/16 O.c.. any one with any ideas where i might fing one, the help would be appreciated

firehawkmph

I was thinking of the leather belts that are composed of individual links, but it may be a bit wide. You might try a google search listing the size of the belt in the search. Good luck,
Mike Hawkins

Woodchuck1957

Assumeing a V-belt is what your looking for, you don't really say what type of belt it is you need. Fenner Drives does make a 3/8 ths of an inch wide PowerTwist link V-belt. It will cost more than a regular V-belt, but worth every penny. You can adjust it to any length, and it reduces vibration quite a bit. I buy mine by the foot locally at Motion Industries. So far I have the 1/2 inch version on two Contractor tablesaws, the bandsaw is next. If you choose not to go that route and try to find a regular V-belt, go to a electric motor shop, DO NOT go to a auto parts store. The angle on the sides of a automotive belt are different than a electric motor belt and will not fit your pulleys correctly. I was told this by a partsman with many years of experience in auto parts sales when he asked what the belt I was looking for fit.

99flhr

a belt that is 3/8ths wide on the the outer portion is a "3L" belt
McMaster- Carr Supply Co of Cleve. OH lists 3L belts from 26" to 74"
As an example p/n 6190K84 is $6.42
"trade size" is 3L660 (3/8ths x 66)
Their catalog (3300 pages) is available for on line viewing.
Take careful measurements before ordering.
Hope this helps

EDIT: Their selection of hard to find fasteners and hardware is outstanding.

Handyman

Pota Mill Your one stope shop for ALL old tools is www.owwm.com The folks on that site know all and tell all about old tools.

__________________
Collector of Old Tools
Fixer of all things broke
Expert = Drip under pressure

Walter_Lars

check this people out
I used them to find a drive for a older table they came up with a part that fits a differant table saw
and they work on woodworking tools a lot

Mike's Tools - Woodworking Tools, Metalworking Tools, Power Tools, Cordless Tools, Used Tools - Mike's Tools

imjunkman

Hi. Wondering if you ever found anywhere to purchase this belt or have one made. I am in need of same belt. Thanks

mmtools

Delta has discontinued the Delta planer part you are looking for, but an alternative belt can be found using part # 3L670 (the 3L for 3/8" and the 670 for the 67" length). It looks like there is a brand called Gates that sells this size of belt. If you google "Gates 3L670" I think you may find what you are looking for.
Good luck!

__________________
Mike O
Vegetarians, and their Hezbollah-like splinter faction, the vegans ... are the enemy of everything good and decent in the human spirit. - Anthony Bourdain
Toolsandmachinery.com

TomD

Any industrial supply can provide a belt, Graingers, McMaster-Carr or your local NAPA dealer can get you the correct size.

Tom

Clouseau

Most powertrain part suppliers will have the Dayton or Gates brands of belts. Even cogged belts. If I can find the dimensions I never go OEM.

__________________
St. Louis, MO

hjcllc

if your planer is ser. no. 158-6340 or higher you need a 7m1700 polyflex. This is identical to part no 22-424 which is discontinued through delta. royalsupply.com has it sku # 89031700. I just replaced mine and it matches up perfectly.

I am having a hard time finding var. feed drive belt 1202118 it is a double coged v belt 46" x 3/8 top 1/4 bottom and 5/16 tall. I guess belt is coged top and bottom so it can flex over small diameter motor pulley. Anybody got any idea where to find one of these?